MS Series Soft Starters

MS Series Soft Starters increase a motor's lifetime by reduce the load and torque in the power train and electric current surge of the motor during start-up and will protecting it from electrical stresses. Furthermore, MS Series Soft Starters can be any control system that reduces the torque by temporarily reducing the voltage or current input, or a device that temporarily alters how the motor is connected in the electric circuit. With many built-in motor protection features, your motor is safe in its hands and will not cause excessive wear on

- Gears and chains

- Belts and pulleys

- Coupling and bearings, and

- Hammering effect on pumps

The MS Series Soft Starters comes with a standard internally by-passed feature and provide fit and forget concept along with reliability, quality, flexibility, competence and technical advancement. In addition, the MS Series Soft Starters would guarantee no heavier current surge on any electrical supplies which can be severe enough to cause voltage dips and flickering lights as well as pitting and burning of contacts due to high currents which are many times above the motor full-load current.

Features

- Truly solid state digital controlled AC semiconductor Soft Starter

- Rated voltage up to 230VAC ‑ 460VAC, 50/60 Hz

- Rated current: 12 ‑ 74A (460V)(5.5kW/7.5HP) to (37kW/50HP)

- Individual adjustable ramp up and ramp down times, 0 ‑ 30sec

- Selectable Control Voltage: 110VAC/220VAC ± 5%

- Unlimited start/stop operations per hour

- Initial torque adjustable from 30 ‑ 100%

- Soft starter over temperature

- Motor over current protection

- Input and output phase failure

- Internally by-passed feature

- Selectable motor current

- Kick start of full torque

- Control supply failure

- LED status indication

- Bypass relay failure

- Build in cooling fan

- Easy installation

- SCR failure